Ridgid 15 Amp 10 in Heavy-duty Portable Table Saw With Stand Review

RIDGID xv-Amp ten in. Heavy-Duty Portable Table Saw with Stand

In the interest of total disclosure, I take to say that the RIDGID R45101 10" Jobsite Table saw is NOT my favorite tabular array saw.  But that'southward just because I've had a Delta Unisaw in my store for almost two decades, and then all other saws are fighting for second place.  But there is one big problem I've discovered with my Unisaw.  And when I say "big problem", that'southward exactly what I mean, because it's Big and heavy, and my md doesn't recommend me lifting anything that weighs more than than a quarter of a ton, even if I need a table saw on the jobsite.

So, does this RIDGID portable jobsite table saw win second place?  It very well might, equally information technology incorporates a lot of the features I've come to rely on in my cabinet saw into a transportable contractor saw.   And I don't take to enquire for permission from my doctor before I move it!

Features of the RIDGID R4510 10" Tabular array Saw

• 15 amp motor / up to 4,400 RPM
• 10" inch blade
• Tool-costless blade guard system
• Micro just rip debate: has 12 inches to the left and 25 inches to the right for cut wide materials
• Cut depth: Maximum 2 ¼ inches at 45 degrees and 3 ½ inches at 90 degrees

(You'll also see this saw listed as model #R4510.  I checked with RIDGID, it'south the same saw.)

Video Overview of the RIDGID R45101 Portable Jobsite Table Saw:

Take a look at the video and so we'll await at the saw in more depth:

Of course I desire the saw to brand accurate cuts, and this saw does, but aside from that, my favorite feature is the TSUV.  I had no thought what that was either, but stands for Table Saw Utility Vehicle.  I considered taking it out off-roading, but instead I took it to the jobsite and realized that this particular characteristic is the key to this saw beingness and so portable.  I've worked with numerous contractor saws, only none that take had a stand that sets upwards this fast or easy.  In less than v seconds I was prepare and set to cut.

The TSUV stand up is very easy to use.

Tour the saw:

So at present that the saw'south gear up, let's talk about some of the well-designed built-in features.   If you choose to take your blade baby-sit off for some applications, this saw has convenient on-lath sRtorage for the "modular blade baby-sit system" which consists of the blade baby-sit, anti-kickback pawls, and blade-change wrenches.

The blade guard assembly and the wrenches store neatly out of the way.

The power switch on a table saw is very important to me.  A lot of times I'chiliad wrangling larger pieces of material and nobody wants to fumble around to detect or utilise the switch.  This one is easy to use, correct where you'd expect it to exist, and it features a lock-out cardinal for added safety.  I also was pleased with the ease of use on the bract adjustment controls.  The adjustment wheel is micro-adjustable and information technology controls both blade height and bevel.  I did have to fiddle with the bicycle a bit to get used to it, but once you practice it's a easy.

The power switch and knob controlling blade height and bevel are easy to access.

Accessory storage on a portable saw like the R45101 tin can sometimes exist tricky, but RIDGID has got this under control.  The rip contend, miter judge, and push button stick all constrict abroad and stay put securely when the saw is being used.

Miter gauge storage

A minor detail, only 1 that always seems to be an issue when I'yard moving tools from one jobsite to another, is the ability cord storage.  The 6' string wraps neatly effectually the back of the saw, which is also where the grit port is located.   I do have one complaint nearly the grit port and that is information technology gets chock-full easily when larger slices of woods find their fashion into the cabinet.  But it besides cleans easily, so in the scheme of things, it's not that big of a complaint.

Ability cord storage

Saw in Use:

I really did bask using this saw.  There were no issues with the rip fence shifting, even when cutting larger, heavy stock.  This is a vast comeback over portable saws I've used in the by.

The fence is stone solid in my opinion.

And the "loving tap" I requite the fence with the side of my fist when using the micro-aligning dial is probably just an old habit.

I still bump information technology, merely the micro-adjustment dial is easy enough to use.

Ane of the problems with many of the table saws on the market is that if you remove the safety devices: the riving pocketknife, blade guard, and anti-kickback prawns, they rarely become dorsum on the saw because of the difficulty of installation.  Patently, we advise you to follow all safety precautions and recommendations from the manufacturer, but if you practise discover yourself in a position to remove said devices, in almost thirty seconds you can have all three installed or uninstalled.  Then at that place is no demand to leave them off permanently.  Prissy job RIDGID engineers!

Riving knife adjustment mechanism

The blade guard and anti-kickback pawls are easily installed or uninstalled with the push of a push button.

I used this saw on a deck install to rip deck boards and 2x lumber.  I found the results to be almost-perfect.   As far as store applications, I've cutting plywood to size and again institute the results to exist authentic and the cuts to be smooth.

RIDGID R45101 Table Saw Final Thoughts

Overall, afterward testing the table saw both on the job site and in the store, I retrieve this saw is a lot of bang for the cadet.  Y'all'll find features that normally come with a higher price tag, and they were all thoughtfully executed.

I got clean cuts even when using the stock blade.

I always come across what negative comments are made in user reviews online to encounter if these flaws happen in my testing, or if I can brand them happen.  I did read a couple of comments well-nigh the motor burning out quickly, only the exam unit that I received showed no indication of that so far. Possibly dust collection was not used in those cases, I don't know.

I do know this:  a contractor that I regularly work with has owned the previous generation to this RIDGID saw for years.  He was quite impressed with the upgrades and the performance of this saw fifty-fifty though he still likes and uses its predecessor.  I might have to go on my eye on this saw, or one day I may run into his truck pulling out of my driveway with a big orange tool strapped in the bed.

Ridgid R45101 Table Saw

$499

bolligerjusholl44.blogspot.com

Source: https://www.toolboxbuzz.com/power-tools/saws/ridgid-r45101-10-jobsite-table-saw-review/

Share this post